About a month ago I was lucky enough to acquire a load of 100 year old walnut beams out in rural PA. After going back and forth with a client we decided to use them for a bed I was designing for him. I'm really happy with the turn out on this one.
I re-sawed the beams down to 2" thick planks them finished planed them down to 1 3/4". The entire frame is constructed of 1 3/4" walnut. All of the supports are made of 3/4" walnut with a 2"x2" center support. I finished the bed with 3 coats of Danish oil with the first coat being wet sanded in with 400 grit sandpaper. After that dried I wet sanded the entire bed with mineral spirits and xxxx steel wool.